WATER PUMPING WINDMILLS
If you get the Windmill, you can also look on the How
to install the Windmill, tower and hand pump page for LOADS of hints!
At American Windmills, we pride ourselves on our
rebuilt original Chicago Aermotor Windmills. Every Windmill taken in is completely
cleaned and disassembled. All new turned and ground shafting and bearings and gears are
added to the motor. We ALSO press in an oil seal and roller bearing so this machine
will NEVER leak. This machine will start up in the slightest puff of wind.
Never ever do we weld the Windmill parts that WE sell! The
Windmills are as beautiful as you remember them from 60 years ago! From the outside
the blades and tail look beautiful and dulled; some people call it patina. But on
the inside, the motors are basically brand new! All my complete Windmills come with
installation manuals and our wonderful customer service. Every rebuilt Aermotor
Windmill we sell comes with a FULL 10 years warranty but with minor yearly maintenance, it
should last for 50 years. We also look at the tail pin holes to make sure that
they're round, not oval. The hub spoke holes can be egged out too so we check every
spoke hole. You want a windmill that won't have any problems so that's what you'll
get from AMERICAN WINDMILLS.
We feel that the Windmill is man's perfect machine!
We also carry brand new Aermotor, FIASA,
Baker and Dempster Windmills if that fits with your project.
A sample of the complete rebuilt Aermotor Windmills we offer:
6' Aermotor $3450 (220 pounds...customer friendly)
8' Aermotor $3950 (360 pounds)
10' Aermotor $5150 (660 pounds)
12' Aermotor $7400 (1200 pounds)
14' Aermotor $8800 (too dang heavy)
These windmills will have the original double dipped galvanized blades
and tail. It's hard to NOT get a bullet hole or two, but it's the bullet holes that
give the windmill "character". MOST windmills you buy from somewhere else
will have the new blades and tail. We are one of the last companies that carry the
original Chicago Aermotor material.
If you like the PRIMO product, no bullet holes and PERFECT in every way,
I have that too. Let me know that you're interested in PRIMO.
Here's a 12' Aermotor on a funky tower that the customer built and we
installed out of Reno Nevada.
How about this brand new 19' windmill and tower complete with anchor
posts, a how-to video and the turn off system for $3650? Nice huh? Look for more information about this system here.
Give these pictures a minute to boot up so that you can see the
windmills I sell!
Here's the 8' Aermotor on a 40 foot tower at my office in Placerville.
The smaller one is an 8' windmill on a 20' tower.
Here's a picture of the office...see we really ARE in the business!
Look at this BEAUTIFUL 12' windmill I have for $7500! It has the
oil seals and roller bearings, vintage blades and tail too.
Ellen@windmills.net
530-644-3008 AFTER 8 AM Pacific time
Return to Sales Page
| 
